As an Amazon Associate I earn from qualifying purchases.1. Granville
Granville Ce-Lit Radiator Stop Leak Cement Sealant Powder 1
Granville - Please note: Not suitable for certain Rover models. Compatible with all types of glycol based antifreeze normally used in cooling systems. For: radiators, Cylinder Blocks & Water Pumps. Works with Anti-Freeze & Coolant. Powder formulation in a Sachet.
2. Liqui Moly
Liqui Moly 8956 Radiator Stop Leak
Liqui Moly - Run the heating system. Used for sealing small leaks in cooling circuits of passenger motor vehicles, commercial vehicles, buses and two-wheel vehicles. Small leaks caused by stone impacts, porous soldering points and hairline cracks in the cooling simple are easy to localize one notices that the cooling water level is sinking.
Also suitable for cooling circuit with filters. Shake container before use. With the engine running, pour the contents into the cooling fluid at operating temperature and allow the engine to continue running for a further 10 minutes.
Brand | Liqui Moly |
Manufacturer | Liqui Moly GmbH |
Height | 5 cm (1.97 Inches) |
Length | 10 cm (3.94 Inches) |
Weight | 0.15 kg (0.33 Pounds) |
Width | 5 cm (1.97 Inches) |
Part Number | 8956 |
Model | 8956 |
3. LIQUI MOLY SET
2x Liqui Moly 3330 Radiator Stop Leak Radiator Sealant 150ml
LIQUI MOLY SET - Also suitable for aluminium and plastic cooler. Compatible with all standard cooling stabilisers and anti-freeze. -. Suitable for all cold water and hot water systems, with or without water filters.
Item number: 3330 Also suitable for preventative use. Radiator stop Leak Seals those leaks immediately easily and completely.
Contents sufficient for up to 10 litres of coolant. Beginning to the combustion Raum against all damages to secure coolant. Small leaks due to stone, porous solder connection or hair cracks in the cooling system are not easy to locating is just the coolant is decreasing stand firmly attached.
Brand | LIQUI MOLY SET |
Manufacturer | LIQUI MOLY |
Height | 7 cm (2.76 Inches) |
Length | 5 cm (1.97 Inches) |
Weight | 300 |
Width | 5 cm (1.97 Inches) |
Part Number | SET014280222 |
4. MANNOL
6 x 325 ml Mannol 9966 Radiator Leak Stop/Cooler Sealant Additive
MANNOL - For removing leaks in the cooling circuit of the engine. Seals leaks in seals, clamps and small cracks in the radiator. Mannol cooler sealant item : 9966. Item: 6 / 1950 ml.
5. KALIMEX LTD
KALIMEX LTD ST5501 Coolant Leak Repair, One Size
KALIMEX LTD - Multi purpose ONe Step & Permanent. No flushing. Item package dimension: 4. 4 cm l x 8. 8 cm w x 12. 6 cm H. Mixes with all types of Antifreeze. Just shake, pour and go.
Brand | KALIMEX LTD |
Manufacturer | K-Seal International Limited |
Height | 15.24 cm (6 Inches) |
Length | 20 cm (7.87 Inches) |
Weight | 0.27 kg (0.6 Pounds) |
Width | 5.08 cm (2 Inches) |
Part Number | ST5501 |
Model | ST5501 |
Warranty | 1 year manufacturer |
6. Radweld
3x250ml = 3 Pack, Holts Radweld Radiator Leak Sealer HOL-RW2Y-3
Radweld - 5055661704007,. Radweld radiator sealer, Number 1 radiator repair, Undisputed market leader, Permanently seals radiator leaks. Permanently seals radiator leaks, unaffected by anti-freeze also contains rust inhibitors, safe for use with rubber hoses.
Brand | Radweld |
Manufacturer | Holts |
Weight | 0.75 kg (1.65 Pounds) |
Part Number | HOL-RW2Y-3 |
Model | HOL-RW2Y-3 |
7. K2
3 x 18.5g Professional Cooling System Sealant Glue Radiator Additive Stop Leak K2
K2 - Extremely easy to use. Safely fills & seals minor leaks in a cooling system. Essential during long distance trips in case damage of a radiator. Can be mixed with any available antifreeze and coolants, including extended life coolants.
Doesn't block or corrode any components of a cooling system. 3 x 18. 5 g premium quality k2 Stop Leak Professional Cooling System Sealant.
Brand | K2 |
Manufacturer | Melle |
Part Number | T230 |
8. K-Seal
K-Seal DE5501D Universal Radiator Sealant
K-Seal - Permanent sealing. Sealing most leaks in engine blocks, cooling systems, cylinder heads etc. Just add to the cooling systems! K-seal - the all-rounder, repairs almost everything in the system. Cooling system does not need to be emptied or rinsed before use.
Brand | K-Seal |
Manufacturer | K-Seal |
Height | 11 cm (4.33 Inches) |
Length | 8.5 cm (3.35 Inches) |
Weight | 0.3 |
Width | 4 cm (1.57 Inches) |
Part Number | DE5501D |
Model | DE5501D |