Top 9 Dent Suction Puller UK – Body & Fender Repair Tools

As an Amazon Associate I earn from qualifying purchases.

1. Outus

#ad

2 Pack 5.5 cm Dent Puller Car Dent Suction Cup Auto Body Dent Puller Removal Tool Orange

#ad
Outus #ad - Dimension: the suction cups with lifter are in orange, and their the diameter is 5. 5 cm/ 2. 17 inches, suitable for middle sized dents on cars. Material: the handles of these dent pullers are made of ABS and suction cups adopt silicone material, can be applied for a long lasting time.

Wide application: these dent pullers can be widely applied for glasses, car dents, cell phones, doors, computers or other smooth and flat surfaces. Suitable place: you can apply these suction cups at home, shops, computer, garages or workplaces, those are good tools for repairing cell phone, car dent, etc. Function: the dent pullers has good quality to apply with strong adsorbability, can afford about 10 kg pressure, easy to apply without any tool.
BrandOutus #ad
ManufacturerOutus #ad
Height6.5 cm (2.56 Inches)
Length5.5 cm (2.17 Inches)
Weight0.07 kg (0.17 Pounds)
Width5.5 cm (2.17 Inches)
Part NumberOutus-Suction Cup-01

2. Outus

#ad

2 Pack 5.5 cm Dent Puller Car Dent Suction Cup Auto Body Dent Puller Removal Tool Black

#ad
Outus #ad - Dimension: the suction cups with lifter are in black, and their the diameter is 5. 5 cm/ 2. 17 inches, suitable for middle sized dents on cars. Suitable place: you can apply these suction cups at home, shops, garages or workplaces, those are good tools for repairing cell phone, car dent, computer, etc.

Function: the dent pullers has good quality to apply with strong adsorbability, can afford about 10 kg pressure, easy to apply without any tool. Warm notice: please do not pull it too hard; Material: the handles of these dent pullers are made of ABS and suction cups adopt silicone material, can be applied for a long lasting time. Wide application: these dent pullers can be widely applied for glasses, car dents, cell phones, doors, computers or other smooth and flat surfaces.
BrandOutus #ad
ManufacturerOutus #ad
Height5.5 cm (2.17 Inches)
Length13.5 cm (5.31 Inches)
Width6 cm (2.36 Inches)
Part NumberOutus-Suction Cup-01

3. GUNSON

#ad

Gunson 77091 Mini Dent Puller

#ad
GUNSON #ad - Ideal for minor car panel dents. Also ideal for positioning tiles and mirrors in bathrooms, kitchens etc. Has a strong pulling power. Can be used in pairs if necessary. Automotive Tool. Diameter of pulling disc 54. 24mm.
BrandGUNSON #ad
ManufacturerTool Connection (EU) #ad
Height15.5 cm (6.1 Inches)
Length5.5 cm (2.17 Inches)
Weight0.06 kg (0.13 Pounds)
Width9.4 cm (3.7 Inches)
Part NumberLAS77091
Model77091
Warranty0.

4. Manelord

#ad

Glue Shovel for Auto Dent Removal,Minor dents, Manelord Auto Body Repair kit, Car Dent Puller with Double Pole Bridge Dent Puller, Glue Puller Tabs, Door Dings and Hail Damage

#ad
Manelord #ad - Please contact us directly if you have any question or dissatisfaction. Also, it is effective on thin metal surfaces and is not suitable for metal surfaces exceeding 1mm. Technical support: we have excellent customer service team which can help you solve your product issue after purchase.

Professional design - using the principle of leverage to design the dent puller is ergonomic, the dent bridge puller with a unique arched bridge can adjust the spacing and rotate the button to better fit the dents, the efficient and labor. Efficient action on automobile, refrigerator, washing machine and other metal surface dents. Attention: this dent puller item does not include glue gun and glue sticks, we suggest user purchase hot melt glue gun and hot melt glue sticks to work with it.

Package information: 1pc double pole bridge dent puller, 2pcs Glue shovels, 5pcs Blue dent puller tab, 1pc Empty bottle, 5pcs Black puller tab, 1pc Black clean cloth Note: not glue gun and glue include. Widely used - suitable for any auto dents, repair door dings and hail damage and other dents.
BrandManelord #ad
ManufacturerManelord #ad
Part Number4333

5. ABRUS

#ad

ABRUS Vacuum Suction Cup Dent Puller Handle Lifter Car Dent Remover

#ad
ABRUS #ad - Works on body panels, metal sheet and more | note - this vacuum suction Cup can be used for Some Easy and Small Dents Only; If you Dent which is Larger or Difficult to remove, Glass, please buy some Larger Puller.

Smaller sized suction cup handle gets into tight Spots still Huge Strength | Made from Durable, Odourless Extra Strength Rubber giving Ergonomic Grip, Making Pulling Easier. Abrus vacuum suction cup Dent Puller Handle Lifter Car Dent Remover. For dent repair - use lukewarm water to clean the dent surface and suction pad as well, pull the suction Cup using the Handle, Flip the Suction Cup Handle Ensuring Suction Cup has firmly Stuck on the Dent Surface, put down the suction cup Handle and Place the Suction Cup on the Dent Surface Closely, the Dent Surface will then be pulled up with the Suction Cup.5

55mm suction pad with max suction 15kgs | soft rubber Cup form a Seal on Most Flat, Non-Porous Surfaces; Close the Handle to Create Powerful Vacuum.
BrandABRUS #ad
ManufacturerAbrus #ad
Part NumberE06822

6. Shoze

#ad

Shoze Suction Cup Dent Puller Handle Car Body Sag Repair Suction Cup Slide Tool Hammer Kit Air Pneumatic Dent Puller

#ad
Shoze #ad - Make it easy to pull dents out of panels. Strong repairing ability of pneumatic sag. Repair a large area of a dent in a car. It is durable for years of use. 100% brand new and high quality.
BrandShoze #ad
ManufacturerShoze #ad
Height9 cm (3.54 Inches)
Length45.5 cm (17.91 Inches)
Width9.5 cm (3.74 Inches)
Part NumberA519040209480107E2VG3CPGPF1X(W(G&H

7. Seully

#ad

Aluminum Alloy Heavy Duty Single Suction Cup, Dent Puller Car Dent Auto Body Dent Puller Removal Tool, Dent Remover Heavy Duty Professional Glass Lifter Gripper Mover,Yellow

#ad
Seully #ad - Wide range of applications: you can use these suction cups at home, in the garage or in the workplace. Great for lifting, mirror, in the store, pulling, handling materials such as glass, gripping, moving, metal sheet, etc.

Material: the handle of the groove handle is made of durable aluminium alloy body and heavy duty plastic handle, and the suction cup is made of rubber material, which can be used for a long time. Size: the suction cup with lifter is yellow, ideal for carrying heavy, awkward items such as windows, 123mm / 4.84 inches in diameter, doors & mirrors. Function: the puller has good quality, strong adsorption force.

Load capacity of up to 50 kg 110 lb lifting the suction level and 35 kg 77 lb in upright position, strong applicability, and can be used without tools. Special design:with buckle design, durable and not easy to deform. Impact-resistant housing, strong pulling force, solid, precise structure, solid rubber base for durability.
BrandSeully #ad
ManufacturerSeully #ad
Part Numberf2d-00014

8. Cane Garden

#ad

58mm Mini Car Suction Cup Dent Puller Bodywork Panel Remover Perfect Suction Cup Removal Tool

#ad
Cane Garden #ad - 2 inch small dents remover for pulling automotive car hail and door ding damage. Comfortable handle. Quick release handle design, easy to use. Rubber suction cup allows for gentle and scratch-free use. Multifunction. Car damage removing tool. Can be used on glass, mirror or any smooth sheet material. Designed to pull dents from nearly any vehicle surfaces including metal and plastic. Durable and reliable. Heavy-duty.
BrandCane Garden #ad
ManufacturerCane Garden #ad
Part NumberCG-037

9. Liuer

#ad

5.7cm, Max Load 10kg, Liuer 3pcs Dent Puller Car Dent Suction Cup Auto Body Dent Puller Removal Tool Blue, Black, Red

#ad
Liuer #ad - Can be widely applied for glasses, doors, car dents, cell phones, computers or other smooth and flat surfaces. Material: the handles of these dent pullers are made of ABS and suction cups adopt silicone material, can be applied for a long lasting time.

High-quality abs plastic, Exquisite and Durable, Easy to Use. Can apply these suction cups at home, computer, garages or workplaces, car dent, shops, those are good tools for repairing cell phone, etc. Perfect tool for pulling out dents. Good quality to apply with strong adsorb ability, can afford about 10 kg pressure, easy to Uapply without any tool.
BrandLiuer #ad
ManufacturerLiuer #ad
Part NumberLLLAHXP-01